Task 5: Connecting The Power - Promise Technology Vess R2000 Serie Guia De Inicio Rapido

TASK 5: CONNECTING THE POWER

Plug in the power cables on all power supplies.
Important
If you have a SAN, DAS, or Cascade with JBOD Expansion, always power on the
JBOD subsystems first.
The Vess R2600 and Vess J2600 enclosures can be equipped with up to four power supplies for
each unit. A minimum of two operating power supplies are required for normal function of both the
Vess R2600 and Vess J2600. The standard shipment includes three power supplies. Contact your
vendor for information on additional power supplies.
Figure 25: Vess R2600fiD rear panel power connections
PSU1, PSU2 and PSU3 are installed on
both the Vess R2600 and Vess J2600.
Connect all power supplies to a suitable
power source.
All manuals and user guides at all-guides.com
25
An optional fourth
power supply (PSU4)
can be installed in this
bay. See the product
manual for more in-
formation on installing
and swapping power
supplies.