Interface Personalisation; Lock/Unlock - Selco Genesis 284 PSR Instrucciones De Uso

Confirm the operation by pressing button (3)
Cancel the operation by pressing button (4)

3.10 Interface personalisation

Allows the parameters on the main screen and in the quick
choice menu to be personalised.
1 Main screen personalisation
Select the parameter that you wish to replace by press-
ing the encoder button.
Enter the quick choice menu by pressing button (1)
.
Select the required parameter by rotating the encoder
until it is brought within the central quadrant (2).
The value and the unit of measurement of the selected
parameter are shown alongside (3).
Store the selected parameter on the main screen by
pressing button (4)
2 Quick choice menu personalisation
40
All manuals and user guides at all-guides.com
.
.
.
Enter set-up by pressing the encoder button for at least
3 seconds.
Select the required parameter by rotating the encoder
until it is displayed within the central quadrant (5).
Store the parameter selected in the quick choice menu
by pressing button (1)
Cancel the selected parameter from the quick choice
menu by pressing button (1)
Save and exit the current screen by pressing button (4)
.
3 7 segment display personalisation
Enter set-up by pressing the encoder button for at least
3 seconds.
Select the required parameter by rotating the encoder
until it is displayed within the central quadrant (5).
Store the selected parameter in the 7 segment display
by pressing button (3)
Save and exit the current screen by pressing button (4)
.
Default

3.11 Lock/unlock

Allows all the settings to be locked from the control panel with
a security password.
Enter set-up by pressing the encoder key for at least 5 seconds.
Select the required parameter (47) by rotating the encoder until
it is displayed within the central quadrant.
Select the required parameter (551).
.
.
.