BALDR B0359WST2H2PR Manual Del Usuario página 17

Default setting : High Temperature Alert: 35°C(95°F),
Low Temperature Alert: 10°C(50°F).
3. When in temperature alert display mode, press "ALERTS "
button to select the alert you want to turn on/off
(alerts checking order in the above step 2).
Press "▲/ CH " or " ▼/RCC " button to select ON or OFF.
(Default setting : OFF)
4. Temperature alerts symbol will display on screen after alerts
turned on.
5. Press any button to stop the alert sound when alert rings.
6. Touch top button any time to save and/or exit.
7. If no operation for 5 seconds, it will automatically save and/or exit .
Temperature Alerts Setting
1. When in time display mode, press and hold "ALERTS " button to
enter temperature alerts setting. The temperature alert value will
be flashing.
2. Alerts setting order: Outdoor High Temperature Alert→ Outdoor
Low Temperature Alert → Indoor High Temperature Alert →Indoor
Low Temperature Alert → Exit.
3. Press "▲/ CH " or " ▼/RCC " button to adjust the value.
Hold to adjust quickly.
4. Press "ALERTS" button to confirm and move to next alert setting.
5. During setting, touch top button to save and exit setting.
6. During setting, if no operation for 20 seconds, it will automatically
save and exit setting.
Notes:
● When in channel scan display mode, check or set the alerts ,
it will automatically exit channel scan display mode.
● When in current outdoor sensor channel, the alert symbol will
continue flashing on the screen until alert value is out of alert range.
● Four temperature alerts setting: indoor and outdoor 3 channels.
17