BALDR B0359WST2H2PR Manual Del Usuario página 22

"HH.H/LL.L"
display in indoor
and/or outdoor
temperature
If your BALDR product does not operate properly after
trying the troubleshooting steps, please contact the seller
on your order page or shoot an email to: service@baldr.com.
PLACEMENT INSTRUCTION
BALDR sensors are sensitive to surrounding
environmental conditions. Proper placement of both the
main unit and outdoor sensor are critical to the accuracy
and performance of this product.
Main Unit Placement
Place main unit in a dry area free of dirt and dust. To help
ensure an accurate indoor temperature measurement, be
sure to place the Main unit away from heat sources or vents.
Outdoor Sensor Placement
Sensor must be placed outside to observe outdoor conditions. Sensor
is water resistant for water splashes and is designed for general
outdoor use, however, to extend its life place the sensor in an area
protected from direct weather elements. The best location is 1.2 to 2.4
meters (4 to 8 feet) above the ground with permanent shade and
plenty of fresh air to circulate around the sensor.
If the temperature is higher than the
detection range, "HH.H" will display on
screen for indication; if lower than the
detection range, "LL.L" will display on
screen for indication.
22