Maintain The Rimage 2000I; General Cleaning; Clean The Exterior; Clean The Ink Cartridges - Rimage 2000i Manual De Usuario

Rimage 2000i™

Maintain the Rimage 2000i

The procedures in this section will help keep your Rimage 2000i in optimum operating condition.

General cleaning

Tip: To keep your Rimage 2000i
clean, keep it in a dust free
environment.
Tip: Use only Rimage inkjet print
cartridges and, for best results, follow
the guidelines below:
•
Keep print cartridges sealed in the
original package until they are
needed.
•
Store print cartridges at room
temperature (60 - 78 degrees F or
15.6 - 26.6 degrees C).
•
Store print cartridges in an upright
position - not on their sides or
upside down.
•
Do not remove the protective tape
from a new print cartridge until just
before you install it. Once you
remove the tape, do not reapply it.
•
After you have removed the
protective tape, avoid touching the
contacts and nozzles.
•
Print at least once a month to
keep the print cartridges in good
working order.
14
All manuals and user guides at all-guides.com

Clean the exterior

If your Rimage 2000i becomes dusty:
1. Power off the Rimage 2000i.
2. Wipe the exterior with a damp, lint-free cloth.

Clean the ink cartridges

This functionality allows you to clean the ink cartridge nozzles.
The nozzles may become clogged from dried ink, causing poor
print quality.
1. Navigate to Printing Preferences. Refer to page 8.
2. Select the Service tab.
3. On the Service tab, select Service ToolBox. The Service
ToolBox window opens.
4. Select Clean Cartridges. The Cleaning Cartridges
window opens.
5. Select Light to clean the ink cartridge nozzles with the
least amount of ink. The status field at the bottom of the
Cleaning Cartridges window displays a message when the
cleaning is complete.
6. To close the Cleaning Cartridges window, select OK.
7. To close the Rimage Service ToolBox window, select OK.
8. To close the Preferences window, select OK.
Note: Print a test disc after cleaning the ink cartridge
nozzles. If print quality is still poor, you can use this
process and, in step 5, select Medium or Heavy to
clean the ink cartridge nozzles.
110763_I