Replacing Consumables; Replace The Fan Filter - Rimage 2000i Manual De Usuario

Rimage 2000i™

Replacing Consumables

This section provides information about replacing the consumables on the Rimage 2000i.

Replace the fan filter

The fan filter is a consumable item. You will need to change the fan filter after 20 ink cartridges. Use this
procedure to change the fan filter.
1.
On the back of the Rimage 2000i,
use your thumb and forefinger to
firmly grasp a corner of the fan filter
retainer.
2. Gently pull the fan filter retainer
away from the back of the Rimage
2000i.
3. Remove the filter material.
4. Place the new fan filter in the fan
filter retainer.
5. With your thumb and forefinger,
gently grasp the fan filter retainer.
6. Firmly press the fan filter retainer
into the slots on the back of the
Rimage 2000i until it snaps into
place.
18
All manuals and user guides at all-guides.com
110763_I