Andis SBLC Instrucciones De Uso Y Cuidado página 3

12. Use of a charger not sold by Andis may result in risk of fire, electric
shock, or injury to person.
13. Do not disassemble charger. Incorrect reassembly may result in a
risk of electric shock or fire. When repair is required, send or take it
to an Andis authorized service station.
14. The battery in this clipper is designed to provide maximum trouble-
free life. However, like all batteries, it will eventually wear out. Do
not attempt to replace battery. When repair or replacement is
required, send or take it to an Andis authorized service station.
15. Batteries can be harmful to the environment if disposed of
improperly. Many communities offer recycling or battery collection.
Contact your local government about disposal practices in your
area.
16. WARNING: Never touch both terminals on clipper with metal
objects and/or body parts, as short circuit may result. Keep away
from children. Failure to comply with these warnings could result in
fire or serious injury.
17. Keep the appliance dry.
18. WARNING: During use, do not place or leave appliance where it
may be 1) damaged by an animal or 2) exposed to the weather.
19. WARNING: For the purposes of recharging the battery, only use the
detachable supply unit provided with this appliance.
20. WARNING: Oil blades frequently. Blades may become hot after
prolonged use.
21. This appliance is intended for trimming purposes only.
22. This appliance contains batteries that are only replaceable by skilled
persons.
SAVE THESE INSTRUCTIONS
OPERATING INSTRUCTIONS
• The battery must be removed from the appliance before it is recycled.
• The battery is to be recycled as a lithium-ion battery.
UNIVERSAL AC/DC POWER ADAPTER
1. Remove the wall adapter and charger from the carton.
2. Note the charger comes standard with a universal AC voltage wall adapter and interchangeable plugs for
use in most countries around the world (Figures A-F).
3. To attach the desired plug to the wall adapter, align the slots on the plug to the ribs on the wall adapter and
slide into place. The plug will "click" into place when properly attached. To remove, locate the button marked
"push" on the wall adapter. Press the button and slide the plug from the wall adapter. The plugs for the
various countries all attach and remove using the same method (Figure G).
4. Connect the power cord to the back of the charger and then insert the transformer into an AC outlet.
CHARGING CLIPPER
The 13.5V 2.2A AC adapter is only intended for use with Andis Model SBLC lithium-ion clipper. Remove the
clipper and AC adapter from the carton. Plug the AC adapter into a 100-240V, 50/60 cycle AC outlet, or as
noted on the unit. Plug the adapter cord directly into the receptacle on the bottom of the clipper (Figure H).
The clipper ON/OFF switch must be in the OFF position for the battery to charge (Figure I). The charging
indicator light on the clipper will turn red when the clipper is charging. When clipper is fully charged, the red
light will turn green (Figure J).
3