Replacing Fuse; Checking Wiring And Connectors; Exhaust Leakage; Water Leakage - Yamaha F6A Manual Del Propietário

EMU01315

REPLACING FUSE

If the fuse has blown on an Electric start
model, open the fuse box and replace the
fuse with a spare one of proper amperage,
using a fuse puller.
WARNING
@
Be sure to use the specified fuse. An
incorrect fuse or a piece of wire may
allow excessive current flow. This could
cause electrical system damage and a
fire hazard.
@
NOTE:
@
If the new fuse blows again immediately,
consult a Yamaha dealer.
@
1 Fuse box
2 Fuse (10 A)
3 Spare fuse (10 A)
4 Fuse puller
EMU00383
CHECKING WIRING AND
CONNECTORS
1) Check that each grounding wire is prop-
erly secured.
2) Check that each connector is engaged
securely.
EMU00384

EXHAUST LEAKAGE

Start the engine and check that no exhaust
leaks from the joints between the exhaust
cover, cylinder head and crank case.
EMU00385

WATER LEAKAGE

Start the engine and check that no water
leaks from the joints between the exhaust
cover, cylinder head and crank case.
4-45
GB