Bracket; Black 1-9/16" Flat Head Screw; Hidden Cam - Sauder 420449 Instrucciones De Montaje

Step 12
1
G
D262
å Pull the DRAWER FRONT BRACKETS (9G) apart and slide them
into the grooves in the DRAWER SIDES (D257 and D262). You
may need to gently tap them in with a hammer.
å NOTE: The DRAWER FRONT BRACKETS are marked "RH" and
"LH" for easy identifi cation.
å Fasten the DRAWER FRONT (G) to the DRAWER FRONT
BRACKETS (9G). Use four BLACK 9/16" LARGE HEAD SCREWS (1S).
3
M64
Surface with

HIDDEN CAM

Fasten the DRAWER BRACE (M64) to the DRAWER
å
FRONT (G). Tighten one HIDDEN CAM.
Page 16
Push down
9G
D257
BLACK 9/16" LARGE HEAD SCREW
(24 used in this step)
Maximum
Arrow
210 degrees
Minimum
190 degrees
Hidden part using
recycled material.
Color may vary.
G
VIEW THE T-SLOT BOX VIDEO
2
D262
1S
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
å Slide the DRAWER BOTTOM (D703) into the grooves in the
DRAWER SIDES (D257 and D262) and DRAWER FRONT (G).
4
D262
M64
å Fasten the DRAWER BACK (D167) to the DRAWER
SIDES (D257 and D262) and DRAWER BRACE (M64). Use
fi ve BLACK 1-9/16" FLAT HEAD SCREWS (30S). Repeat
Step 12 for the remaining drawers. The SMALL drawers
will use parts 8G, H, D166, D245, D271, D703, and M64.
420449
With the palm of
your hand, tap
the DRAWER
BOTTOM down
into the groove.
U n fi
n i s h
s u r
e d
f a c
e
D703
G
D257
Start each screw a few turns before
completely tightening any of them.
30S

BLACK 1-9/16" FLAT HEAD SCREW

(30 used in this step)
D167
Be sure the
DRAWER
BOTTOM
D257 inserts into
the DRAWER
BACK groove.
www.sauder.com/service