The Built-In Flash And Vignetting; Using The Lens Hood; Attaching The Hood; Slip-In Filter Holder - Nikon AF-S NIKKOR 200mm f/2G ED VR II Manual Del Usuario

The built-in flash and vignetting

To prevent vignetting, do not use the lens hood.
Jp
• For the latest information on vignetting with this lens, see the camera
manual.
En
Cameras
F65-Series/N65-Series*,
De
F60-Series/N60*,
F55-Series/N55-Series*,
Fr
F50-Series/N50*,
F-601/N6006*,
Es
Pronea 600i/6i*, Pronea S
Se

Using the lens hood

Lens hoods minimise stray light and protect the lens.
Ru

Attaching the hood

Nl
It
Ck
Ch

Slip-in filter holder

Always use a (52mm screw-on) filter. A 52mm Screw-on Neutral Color
NC Filter is attached to the filter holder when shipped from the factory.
Kr
28
Vignetting occurs at any shooting
distance.
• Fully tighten the lens hood screw ( 2 ).
• If the lens hood is not correctly attached,
vignetting may occur.
• To store the lens hood, attach it in the
reverse position.
a Press down on the slip-in filter holder knob,
and turn counterclockwise until the white
line on the knob is at a right angle to the axis
of the lens.
b Pull the slip-in filter holder from the lens
body
c Detach the attached filter from the filter
holder.
d Screw a filter onto the side of the filter
holder marked with the words "Nikon" and
"JAPAN".
• The slip-in filter holder can be attached with
the "Nikon" and "JAPAN" facing either the
lens or camera side without any effect on your
pictures.
*Sold exclusively in the USA