GE PFMS1FFB Manual De Uso Y Cuidado página 46

About the controls with temperature settings.
NOTE: The refrigerator is shipped with protective film covering the temperature controls.
If this film was not removed during installation, remove it now.
The temperature controls are preset in the factory at 37°F for the refrigerator compartment and 0°F for
the freezer compartment. Allow 24 hours for the temperature to stabilize to the preset recommended
settings.
The temperature controls can display both the SET temperature as well as the actual temperature in the
refrigerator and freezer. The actual temperature may vary slightly from the SET temperature based on
usage and operating environment.
Setting either or both controls to OFF stops cooling in both the freezer and refrigerator compartments,
but does not shut off electrical power to the refrigerator.
Changing the Temperature for control styles A & B
For Controls on the Door:
To change the temperature, press and release the WARMER
or COLDER pad. The ACTUAL TEMP light
will come on and the display will show the actual
temperature. To change the temperature, tap either the
WARMER or COLDER pad until the desired temperature is
displayed.
For Controls Inside the Refrigerator:
Opening the door displays the actual temperature. To
change the temperature, press either the WARMER or
COLDER touch pads until the desired temperature is
displayed.
Once the desired temperature has been set,
the temperature display will return to the actual refrigerator
and freezer temperatures after 5 seconds. Several
Changing the Temperature for control style C
To change the Refrigerator temperature:
Access By: Home > Refrigerator
Activate By: Using the arrows to select the desired temperature.
You must press ENTER to set the new temperature.
To change the Freezer temperature:
Access By: Home > Freezer
Activate By: Using the arrows to select the desired temperature.
You must press ENTER to set the new temperature.
Once the desired temperature has been set, the display will return
to the HOME screen and show the set temperatures underneath
the actual temperature display for several seconds. Several
adjustments may be required. Each time you adjust the controls,
allow 24 hours for the refrigerator to reach the temperature you
have set.
Changing the Temperature for control styles D
For Controls on the Door:
To change the temperature, press and release the WARMER
or COLDER pad. The ACTUAL TEMP light
will come on and the display will show the actual
temperature. To change the temperature, tap either the
WARMER or COLDER pad until the desired temperature is
displayed.
Once the desired temperature has been set,
the temperature display will return to the actual refrigerator
and freezer temperatures after 5 seconds. Several
adjustments may be required. Each time you adjust controls,
allow 24 hours for the refrigerator to reach the temperature
4 4 4 4
you have set.
adjustments may be required. Each time you adjust controls,
allow 24 hours for the refrigerator to reach the temperature
you have set.
To turn OFF cooling system, tap the WARMER pad for either
refrigerator or freezer until the display shows OFF
To turn ON cooling system, tap the COLDER pad for either
the refrigerator or freezer twice. The display will show the
preset temperature settings of 37°F for refrigerator and 0°F
for freezer.
Turning the cooling system OFF stops the cooling to
refrigerator, but it does not shut off the electrical power
To turn OFF cooling system, tap the WARMER pad for either
refrigerator or freezer until the display shows OFF
To turn ON cooling system, tap the COLDER pad for either the
refrigerator or freezer twice. The display will show the preset
temperature settings of 37°F for refrigerator and 0°F for freezer.
Turning the cooling system off stops the cooling to refrigerator, but
it does not shut off the electrical power
To turn OFF cooling system, tap the refrigerator WARMER
pad until display flashes and beeps. Then tap the freezer
WARMER pad until display shows OFF.
To turn ON cooling system, tap the refrigerator COLDER
button twice. The display will show the refrigerator and
freezer set temperatures.
Turning the cooling system off stops the cooling to
refrigerator, but it does not shut off the electrical power