Canyon Wasabi SW82 Manual Del Usuario página 3

EN
included), Power Adaptor voltage limit is: 5V, 1A. It
takes up to 2 hours to be fully charged.
1. Make sure the charging pins on the charging cable
fit correctly onto the charging terminals on the back
of the smartwatch.
2. Plug the big end of the USB-cable to a power
source.
For better charging compatibility, it is advisable to
use a Power Bank or wall charger produced by
Canyon. Do not use a fast charging device as it could
result in a short circuit and risk of fire.
Connecting to a smartphone: charge the
smartwatch, turn it on, activate Bluetooth on your
smartphone, download and install Canyon Smart
Watch Application Canyon Life by scanning the QR
code below. Open Canyon Life app-> "Bluetooth
Devices"->"Start"-> choose on your watch from the
Pair Device list >(SW82) -> press "ADD DEVICE"
and you will see Device successfully connected. Use
the application to apply the settings you need, for
example you can: turn on sedentary reminder, select
apps that you want to receive notifications from, etc.
Unpair Smartwatch from mobile phone:
1. Open "Canyon Life" on your smartphone
2. Open "Setup", select "Bluetooth Devices"