Operation; Mode Select - Mitsubishi Electric CITY MULTI PLFY-P20VCM-E Manual De Instrucciones

2. Operation

CENTRALLY CONTROLLED
ON OFF
CLOCK
CHECK
˚C
STAND BY
ERROR CODE
DEFROST
4 TEMP.
2
3
TIMER SET
PAR-20MAA
1 5 0
˚C
TEMP.
TIMER SET
B
˚C
TEMP.
2
TIMER SET
All manuals and user guides at all-guides.com
1[Time-setting] Button
2[Timer/continuous] Button
3[Selecting operation] Button
1Hr.
˚C
FILTER
CHECK MODE
4[Room temperature adjustment] Button
TEST RUN
NOT AVAILABLE FUNCTION
ON/OFF
9
5[Louver] Button
FILTER
7
CHECK TEST
6[Checking/test run] Button
7[Filter] Button
8[Up/down airflow direction] Button
8 6 9[ON/OFF] Button
0[Fan speed adjustment] Button
∗ Some models of the indoor units have no functions. (Operation of the
Before starting operation
• Make sure that the power supply is turned ON before use.
• Start running after the "HO" display has disappeared (max. 2 minutes).
• In some systems, more than one indoor unit may be connected to a
Check and confirm the power circuit before use.
2.1. ON/OFF
Start an operation/Stop an operation
˚C
A
Even if the operation button is pressed immediately after the opera-
ON/OFF
tion is stopped, operation is not restarted for about 3 minutes.
1
FILTER

2.2. Mode select

CHECK TEST
Note:
˚C
The heating display and the automatic display does not appear in
models that operate exclusively as cooling only air-conditioner.
A
ON/OFF
1
FILTER
CHECK TEST
Used to set the current time, starting time, and ending time.
Used to switch between continuous operation and timer operation.
Used to switch between cooling, dry, air blowing, and heating.
Setting is made in a unit of 1 °C.
Used to set the room temperature.
Used to adjust the lateral direction of the airflow.
Used only during checking test run.
Pressed to reset the filter sign.
Once the operation has been set, you can use it repeatedly simply by
pressing the [ON/OFF] button.
remote controller becomes void.)
single outdoor unit. When a remote controller for one indoor unit is used
to change modes at the same time as a different indoor unit is working
together with the outdoor unit, the operation underway stops, and the
new operation begins. Until the old operation is complete, the display on
the remote controller flashes to indicate that the new operation is in
"waiting" status.
Warning:
1 Press [ON/OFF] button
Operation lamp lights up/off and operation starts/stops.
A Operation lamp
Caution:
1 If the unit is off, press the ON/OFF button to turn it on.
A The ON indicator should light up.
2 Press the operation mode (
tion mode.
B
s Cooling mode
Fan mode
Heating mode
Drying mode
Automatic (cooling/heating) mode
) button and select the opera-
3