How To Use The Charger - Max GS732C LT Manual De Operaciones Y Mantenimiento

HOW TO USE THE CHARGER

The special purpose charger Base (Cat.#55638) has the LEDs (green, red) which indicate the status of the charger and Battery.
Green LED Red LED
1. ON
2. OFF
3. ON
4. Blinking Blinking
5. ON
6. Blinking
Battery Charger problems
The following cases are considered to be the problems. Replace the charger and Battery with new ones.
• The green LED is not turned on if the power plug of the charger is plugged into a 100-240 V AC (for household use) plug socket. (With
the Battery unset)
∗ Check with another electric appliance to see whether electricity is available at the plug socket.
• Neither green nor red LED is turned on or blinks if the Battery is set in the Charger.
• The green LED is not turned on 150 minutes after the red one has been turned on.
• The red LED is not turned on if the Battery is set in the charger.
Status
OFF Power-on
ON Charging
OFF Charge Completed
High temperature
alarm
ON Battery alarm
ON Battery high
temparature alarm
The charger has been plugged in. (Power-on status:Battery unset)
The Battery is being charged.
The Battery has been completed charged.
The Battery is hot. (Remove it from the Charger and cool it down for
a while before charging.)
The Battery is defective. (Replace it with a new one)
The Battery is defective and hot. (Replace it with a new one.)
12
Description