Battery Installation - Generac 0059151 Directrices De Instalación

9. Inside the generator, locate the connection panel behind
the control panel. Remove the cover to expose customer
connections.
10. Connect a non-supplied T2 wire from the T2 fuse located in
the transfer switch to the post in the left rear of the connection
panel as shown.

BATTERY INSTALLATION

1. A group 26R battery is recommended for these generators.
2. Follow all of the procedures and safety precautions in the
generator Owner's Manual when installing the battery.
Verify the switch is in the off position. When preparing for
operational testing, DO NOT connect the battery until transfer
switch connections are complete.
General Information
9