Pur Line RAFY 75 Manual De Instrucciones página 11

PARTS
7
8
9
10
11
OPERATION
ASSEMBLY BEFORE USE:
Mount the main body of the appliance and the front/rear base:
1. Remove the two parts of the base from the box, so that the holes of the two-part base are aligned and the two parts
are formed into a complete base.
2. Run the power cord through the base, align the base with the holes on the fan body, then secure the power cord
under the base clip to tighten the base with the fan body.
3. When the base is disassembled, screw out the screws first, and then take the base out.
After the four posts are aligned and wrapped, firmly snap the
base front inward (a sound can be heard), then use the same
method to snap the base back.
To disassemble : Hold the clip and forcibly pull the base out, after the clip comes out, use the same method to remove
another clip.
EN
1
2
3
4
5
6
After the base is put on the fan body, follow
the schematic to secure the power cord
under the base clip, then tighten the screws.
9
1. Control panel
2. Led display
3. Fan blades
4. Body
5. Water level MIN/MAX
6. Base
7. Handle
8. Evaporative filter
9. Rear grid
10. Water inlet
11. Water pump