Jocel JAV103-140LEN Manual De Instrucciones página 24

11. Install the seal at the gap between the freezer's left side and the cabinet，in order to cover the gap.
12. Measure the distance the door from 120mm-150mm to install the door slider. Use the icon to place
accessories nail drill four holes.
13. Fix 4 pieces of ST4*12 screws onto the freezer door. Properly installed to ensure connecting block
and door close.
14. Insert the connector groove in the guide, note the direction. Freezer door and cabinet doors will
close to determine the vertical distance from rail. Measure the distance of the gap between the edge
of the door slide and the distance ensure 25mm. Use ST4 * 12 screws fixed. There are four screws
on the rail mounting hole for the second installation or other problems with the flexibility to adjust.
Freedom to choose and recommend end to end two mounting holes.
15. Check rail and the slider decorative cover, and installation of the screw hole cover. Please confirm
the plug can be touched in order to operate the appliance conveniently after installation.
All manuals and user guides at all-guides.com
Fixed with the screws in accessory
-23-
Cabinet thickness plus 5mm
Cabinet door edge