Cooper Lighting Metalux Micro-Bay Manual Del Usuario página 3

8. Wire according to code. Install channel covers and
reflectors using the hardware provided (2 lamp
fixture shown). Add aligner clips between reflectors
(Figure 8. and Figure 9.).
Stand Alone Fixture
1. Flip socket track in place and wire according to code
(Figure 10.).
2. Install channel covers and reflectors using the hardware
provided (Figure 11.).
Figure 8.
Aligner Clips
Figure 9.
Figure 10.
Figure 11.
Installation Instructions – Micro-Bay
0590MBFINS ADF140684 www.eaton.com
Installation Instructions – Micro-Bay
3