Press-In Frame; Converting From Pushbutton To Foot Switch Connecting Foot Switch For A Machine With Horizontal Drilling Unit - BlueMax Mini Modular Plus Manual De Instrucciones

Instructions for installing optional accessories
14. Instructions for installing optional accessories

1. Press-in frame

2. Converting from pushbutton to foot switch
Connecting foot switch for a machine
with horizontal drilling unit
1. Press-in frame
WARNING
Risk of injury
Servicing and maintenance work must only be carried
out by instructed, qualified personnel.
Before attempting any servicing and maintenance
work or installing the optional accessories, switch the
machine off, disconnect the compressed air supply and
implement measures to prevent the machine from being
en
switched back on again without authorisation.
1
2. Converting from pushbutton to foot switch
The conversion set contains the foot switch, including two
connecting hoses. The foot switch must be placed on the
floor where it must not be allowed to slip.
164
164
164
165
Tightening the screw on
the left / right regulates
the frame swivelling
ability.
3. Installing laser
4. Installing support block
i
2
Screw for adjusting
perpendicularity of
the press-in frame.
166
167