Fein WSS 12-125 Manual Del Usuario página 13

All manuals and user guides at all-guides.com
WSS 12-125 - Buch Seite 13 Donnerstag, 10. Oktober 2002 1:53 13
WSS 12-125
Maintenance and repairs.
!
Risk of injury
Service, testing and repairs may only be car-
ried out by electrical engineers in conformity
with the regulations valid in the respective
country.
Maintenance and repairs.
We recommend our customer service
department (repair centre), FEIN author-
ised service centres and agencies.
Addresses can be found at the end of
these operating instructions and in the
enclosed safety instructions.
Please hand these operating instructions
to the repair centre. An overview of spare
parts can be found at the end of these
operating instructions.
Upon request a repair manual is sent to
the electrical engineers.
Only use original FEIN spare parts.
Spare parts.
The overview of spare parts is at the end
of these operating instructions. Quoting
the parts no. (1), reference no. (2) as well
as the number of spare parts (3) facilitates
the ordering procedure.
Accessories.
Illustrations and reference numbers can be
found at the end of these instructions.
Description of the accessories:
A Rough grinding disc, bent at right
angles for steel.
B Cut-off grinding disc for steel.
C Cut-off grinding disc for stone.
D Clamping unit for rough grinding and
cut-off grinding disc and also for
twisted brushes and fan-like grinding
sheets.
E Elastic backing pad.
F Fibre sanding sheets with differing
grain (packet with 25 sheets).
G Clamping unit for elastic backing pad
and plaited conical brush.
H Fan-like grinding sheets, packet with
10 sheets.
I Plaited conical brush.
J Twist brush.
K Metal carry case
(390 x 210 x 140 mm).
With FEIN guarantee.
All the FEIN electric power tools are
tested carefully and are subject to the
stringent requirements of the quality con-
trol at FEIN.
In addition to the legal warranty we also
provide the FEIN manufacturer's guaran-
tee. For further details on this, please con-
tact your specialist dealer, your national
FEIN representative, or the FEIN cus-
tomer service centre.
Damage due to improper handling, over-
loading or normal wear are generally not
covered by the guarantee.
EN
13