Bosch SensorSteam TDS12 Serie Instrucciones De Uso página 10

en
• This appliance is to be connected and used in
accordance with the information stated on its
characteristics plate.
• This appliance must be connected to an earthed
socket. If it is absolutely necessary to use an
extension cable, make sure that it is suitable for 16A
and has a socket with an earth connection.
• The iron should not be used if it has been dropped,
if there are visible signs of damage or if it is leaking
water. It must be checked by an authorized Technical
Service Centre before it can be used again.
appliance will be rendered inoperative. To restore
normal operation the appliance will have to be taken
to an authorised Technical Service Centre.
• In order to avoid that, under unfavourable mains
conditions, phenomena like transient voltage drops or
that the iron is connected to a power supply system
the user can ask the public power supply company for
the system impedance at the interface point.
• This appliance is not intended to be used by persons
(including children) with reduced physical, sensory
or mental capacities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning the use of the appliance by
a person responsible for their safety.
• Children should be supervised to ensure that they do
not play with the appliance.
the appliance with water or before pouring out the
remaining water after use.
• The appliance must never be placed directly under
• The appliance must be used and placed on a stable
surface.
10
• When placed on its stand, make sure that the surface
on which the stand is placed is stable.
• The iron must not be left unattended while it is
connected to the supply mains.
• Unplug the appliance from the mains supply after
each use, or if a fault is suspected.
• The electrical plug must not be removed from the
socket by pulling the cable.
• Do not allow the power cord to come into contact with
the soleplate when it is hot.
• Do not leave the appliance exposed to weather
conditions (rain, sun, frost, etc.).
• With the aim of avoiding dangerous situations, any
work or repair that the appliance may need, e.g.
replacing a faulty mains cable, must only be carried
Technical Service Centre.
1. Handle with contact sensor.
2. Steam activation button.
3. ActiveControl Advanced indicator lamp. (clear
light)
4. Steam setting selection button.
5. Steam setting indicator lamps.
green = eco
red = max
6. Shot of steam button.
7. Spray button.
8. Water inlet.
9. Filling opening lid.
10. Spray nozzle.
11. Water tank.
13. Soleplate.
14. Temperature index.
15. Temperature control.
16. Power cable.