Tabla de contenido
Publicidad
Trouble
Sluggish operation
Loss of power
Loss of efficiency
SAVE THESE INSTRUCTIONS. DO NOT DESTROY.
MAINTENANCE SECTION
TROUBLESHOOTING GUIDE
Probable Cause
Dirt or oil gum accumulation on
internal parts
Worn Valve
Worn Piston and/or accessory
26
Solution
Pour about 3 cc of a clean, suitable, cleaning solu-
tion into the air inlet and operate for 30 seconds.
After flushing, pour about 3 cc of oil into the air
inlet and operate the tool for 5 seconds to coat the
internal parts with oil.
Replace the Valve.
Replace Piston and or accessory.
Publicidad
Tabla de contenido
