Date &Time; Set Date And Time; Alarm - SOUNDMASTER highline IR4000 Manual De Instrucciones

IR4000DAB / English Instruction Manual
Fuctions: When 'Power On', choose 'Enable' to check the status of network link
automatically; choose 'Disable' not to check it.
Tips: If the network is not linked on the model of 'Enable', it will automatically show the
choices for you to set up the network.
3 Date &Time
Steps: Press MENU→Configuration->press or
button to choose 'Date & Time'→press SELECT to
enter the interface →choose the item by or
→enter it by SELECT.

3.1 Set Date and Time

3.2 Set Time Format
Tips: The format of 24 hour is acquiescent.
○ 12 Hour
○ 24 Hour
3.3 Set Date Format
Tips: The format of DD/MM/YY is acquiescent
○ YY/MM/DD
○ DD/MM/YY
○ MM/DD/YY
3.4 Daylight Saving Time (DST)
○ ON
Tips: On the model of 'ON', the time will be one hour more than the actual time.
○ OFF
Tips: On the model of 'OFF', the time will be same as the actual time.
(If it was on the model of the 'Daylight Saving Time(DST)'and you choose 'OFF', the
time will be deducted one hour, that's to say ,the time will be same as the actual time. )
3.5 GMT（HH: MM AM）
On the model of 'Internet Radio' without internet, the time will be set up automatically.
With internet, it will show the GMT time. If have setup the time, it will indicate the
current time(current GMT time plus the time difference)
Tips: For this item, it can be only browsed without the function of revision.

4. Alarm

To set up three alarms (Alarm 1, Alarm 2, NAP Alarm) and the Alarm Volume
Tips:
●The time of NAP Alarm is from 5 minutes to 120 minutes. And after the setup of the
NAP Alarm, it begins to count the time reversely until the time is over, then it will switch
to the Standby model automatically and rings.
●When alarm rings, it will enter the display of 'Standby' automatically.
●You can set up the alarm volume by 'Alarm Volume'( Volume 15 is acquiescent )
●If you press any button when alarm rings, the alarm will be closed and enter the
model of Standby with 5 minute SNOOZE.
●To press button ,it will exit the model of SNOOZE.
●After the alarm setup, you should exit it, then the new
setup can come into use.
●Two alarms won't ring at the same time.(Only after one
alarm stop ringing, another alarm can be used)
4.1 Alarm 1
Turn On
EN 10