Set The Time; Clock Functions; Setting The Sleep Function - SOUNDMASTER highline URD 840 Manual Del Usuario

5. Operation
● To switch on the appliance, press the ON/OFF button (17). The POWER
ON indicator (29) on the display lights up. To switch off the appliance,
press the ON/OFF button (17) again.
● To adjust the volume level, turn the VOLUME dial (2) until the desired
level is set.
● To connect a headphone, insert the cable plug in the headphone jack (1).
To prevent hearing damage, remember to adjust the volume to
a comfortable level.
5.1

Set the time

● Connect the appliance to the mains. The default time (12:00) flashes on
the display.
● To set the correct hour, press the SKIP FORWARD/HOUR button (13).
● To set the correct minutes, press the SKIP BACKWARD/MINUTE button (14).
● To confirm the setting, press the PROGRAM button (6).
● To switch the clock setting between 12H mode and 24H mode, hold the
CLOCK ADJ (5) button for two seconds.
i
● To set the time, the appliance must be switched off.
● During a power failure, or when unplugging the appliance, the time
settings are lost, unless backup batteries are installed.
5.2

Clock functions

Setting the SLEEP function

● Select the desired radio station or insert a CD.
● Press the SLEEP button (9). The SLEEP indicator (23) is ON.
● To adjust the sleep time, press the SLEEP button (9) until the desired
period is set (90/60/30/15 minutes). The appliance stops playing after the
chosen time has elapsed.
● To cancel the SLEEP function, press the ON/OFF button (17).
9