Complete The Installation - Kohler K-2443 Guia De Instalacion

Attach outlet
hose to spout.

3. Complete the Installation

CAUTION: Risk of Product Damage. Do not overtighten the
connections.
Attach the outlet hose to the back of the spout.
Connect the supply hose marked with the "COLD" label to the
cold supply.
Connect the supply hose marked with the "HOT" label to the hot
supply.
Tighten all connections.
Close and mount the cabinet/shelf according to the
manufacturer's instructions.
Turn on the water supplies.
Check for leaks, then turn the water on with the lever handle.
Ensure the stream of water hits the vessel as specified by the
vessel manufacturer's instructions. If the steam of water needs
adjustment, proceed to the "Adjust the Water Stream" section.
1070285-2-B
Spout
Attach supply
hoses to supplies.
6 Kohler Co.