Holmatro PA Serie Manual De Instrucciones página 39

8.4.6 Oil tank
If the casing did not face downwards during transport, the pump was subject to strong vibrations or the
oil tank was complete empty, air bubbles can occur in the hydraulic oil tank. Air bubbles can cause the
connected equipment to move jerkily. If air bubbles are present, vent the oil tank of the pump.
See Fig. 2 to Fig. 8.
• Set the pressure relief valve (3) to the open (0) position.
• Place the pump in a vertical position with the refill opening facing upwards.
• Remove the filler cap (9).
• Unlock the pump lever (1) with push and unlock (2). Push on the pump lever to unlock.
• Move the pump lever at least 5 times up and down manually.
• Check the oil level (see section 8.4.5).
• Replace the filler cap.
• Lock the pump lever with push and unlock .
• Place the pump in horizontal position.
8.5 Yearly dealer maintenance
We recommend having the equipment inspected, checked, set and tested once a year by a Holmatro
Certified Technician who has the appropriate knowledge and the necessary tools (see also section 1.7).
The Holmatro dealer can organize the yearly maintenance for you on a contract basis.
8.6 Long term storage
• Ensure that the equipment is completely depressurized.
• Store the equipment in a dry, well-ventilated area. Use additional preservatives on the external steel
parts.
9 Decommissioning/Recycling
At the end of its service life the equipment can be scrapped and recycled.
• Make sure that the equipment is put out of order to avoid any use.
• Check that the equipment does not contain any pressurized components.
• Recycle the various materials used in the equipment such as steel, aluminium, NBR (Nitrile
Butadiene Rubber) and plastic.
• Collect all dangerous substances separately and dispose of them in an environmentally responsible
way.
• Consult the Holmatro dealer about recycling.
PA
All manuals and user guides at all-guides.com
916.001.313_000
EN
39