Symbols - Ryobi ONE+ P2704 Manual Del Operador

The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL SIGNAL
DANGER:
WARNING:
CAUTION:
NOTICE:
Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpre-
tation of these symbols will allow you to operate the tool better and safer.
SYMBOL
Safety Alert
Read Operator's Manual
Eye Protection
Wet Conditions Alert
Electric Shock
No Slope
Keep Children and
Bystanders Away
Ricochet
Cutting Hazard
Cutting Hazard

SYMBOLS

MEANING
Indicates a hazardous situation, which, if not avoided, will result in death or
serious injury.
Indicates a hazardous situation, which, if not avoided, could result in death or
serious injury.
Indicates a hazardous situation, that, if not avoided, may result in minor or
moderate injury.
(Without Safety Alert Symbol) Indicates information considered important, but
not related to a potential injury (e.g. messages relating to property damage).
NAME
Indicates a potential personal injury hazard.
To reduce the risk of injury, user must read and understand oper-
ator's manual before using this product.
Always wear eye protection marked to comply with ANSI Z87.1.
Risk of fire and burns. Do not expose battery, battery compartment,
or electronic components to rain, water, or liquids. Close cover
during use. Do not operate on wet ground.
Failure to use in dry conditions and to observe safe practices can
result in electric shock.
Do not operate on inclines greater than 15º. Work across the face
of slopes, never up and down.
Keep all children and bystanders at least 50 ft. away.
Thrown objects can ricochet and result in personal injury or prop-
erty damage.
Keep feet and hands away from rotating tines.
Keep feet and hands away from rotating tines.
Page 5 — English
DESIGNATION/EXPLANATION