bosal 009-468 Manual Del Usuario página 4

6. Draw end of bunch marked with R to right standing lights:
a) Disconnect 6-input joint of vehicle from right standing lights and connect it to suitable joint of electric bunch,
b) Connect remaining joints of electric bunch to right standing lights,
Draw remaining end of bunch marked with L to left standing lights:
7.
a) Disconnect 6-input joint from left standing lights and connect it with suitable joint of electric bunch,
b) Connect remaining joints of electric bunch to left standing lights.
8. Connect (7-polar),
fix it the eyelet terminal with sheet metal screw; do not secure the hole with anti-corrosion agent) .
9.
Trailer power supply:
Only for 13-polar version. 3-input housing (red/blue, yellow and
socket functions. Put this part of lead bunch behind the trim. To expand socket functions it is necessary to order the
following parts:
Function "current supply and earth"
Function "current supply, charge line and earth" part no. 015-069
Fix all the leads with supplied band clips, assemble previously disassembled parts.
Connect accumulator and check all vehicle functions with connected trailer or other suitable testing device.
and white/brown (13-polar) cables to earth (for example drill a 3 mm, connect and
brown leads) is provided for expanded
part no. 014-169