bosal 006-248 Manual Del Usuario página 4

6. Draw end of bunch marked with R to right standing lights. Disconnect 6-input joint and connect it to a suitable jo-
int of electric bunch. Connect remaining 6-input joint of electric bunch to standing lights.
7.
Draw end of bunch marked with L to left standing lights. Disconnect 6-input joint and connect it to a suitable joint
of electric bunch. Connect remaining 6-input joint of electric bunch to standing lights.
Connect brown in 7-polar set, brown and white/brown only in 13-polar set to earth (e.g. drill a 3 mm
8.
hole, connect and fix it the eyelet terminal with sheet metal screw; do not secure the hole with anti-corrosion agent).
9.
Trailer power supply:
Only for 13-polar version. 3-input housing (red/blue, yellow and white/brown leads) is provided for expanded
socket functions. Put this part of lead bunch behind the trim. To expand socket functions it is necessary to order the
following parts:
Function "current supply and earth"
Function "current supply, charge line and earth"
Fix all the leads with supplied band clips, assemble previously disassembled parts.
Connect accumulator and check all vehicle functions with connected trailer or other suitable testing device.
part no. 014-169
part no. 015-069