POSITION FOR QUICK RELEASING
I
LOW WORKING PRESSURE (60kPa)
-
II
HIGH WORKING PRESSURE (100kPa)
-
V. How to use
※ Please clean the pressure cooker, add to water and heat half an
hour before rst time using, by means of cleaning bad smelling.
1. Before use, make sure that the hole of both safety valve and steam-
releasing pipe is unobstructed. If any of them is obstructed, clear them
with the dredging needle. (Fig.8 Observe the steam-releasing is
obstructed or not.)
Fig. 7
Fig. 8