Equalizer Curve Fine Adjustment (Equaliz
You can adjust the center frequency and the Q factor (curve characteristics) of each cur-
rently selected curve band (LOW BAND/MID BAND/HIGH BAND). Adjusted equalizer
curve settings are memorized in "CUSTOM".
Level (dB)
Center frequency
1. Press the AUDIO button for 2 seconds to select Equalizer Curve Fine
Adjustment.
2. Press the AUDIO button to
select the desired band for
adjustment.
3. Select the desired frequency for
each band with the 2/3 but-
tons.
LOW (low) BAND: 40 Ô 80 Ô 100
+ = 160 (Hz)
MID (mid) BAND: 200 Ô 500 Ô 1 k
Ô 2 k (Hz)
HIGH (high) BAND: 3.15 k Ô 8 k Ô 10 k
4. Select the desired Q factor with
the 5/∞ buttons.
2N + = 1N + = 1W + = 2W
Note:
• If you make adjustments when a curve other than "CUSTOM" is selected, the newly adjusted curve
will replace the previous adjusted curve. And new curve and name with "CUSTOM" appear on the
display while selecting the equalizer curve. (Refer to page 52.)
All manuals and user guides at all-guides.com
Q=2W
Q=2N
Ô 12.5 k (Hz)
r)
E
Frequency (Hz)
54