Switching The Auto Pi Seek (Auto Pi Seek); Setting The Warning Tone (Warning Tone); Switching The Aux Mode (Aux) - Pioneer DEH-P90DAB Manual De Operación

Switching the Auto PI Seek (Auto PI Seek)

During Preset Station PI Seek operation, you can switch the Auto PI Seek function
ON/OFF. (Refer to "PI Seek Function" on page 27.)
1. Press the FUNCTION button and select the Auto PI Seek mode (Auto PI
Seek) in the Initial Setting Menu.
2. Switch the Auto PI Seek
ON/OFF with the 5/∞ but-
tons.

Setting the Warning Tone (Warning Tone)

You can switch the Warning Tone function ON/OFF. (Refer to "Warning Tone" on
page 61.)
1. Press the FUNCTION button and select the Warning Tone mode
(Warning Tone) in the Initial Setting Menu.
2. Switch the Warning Tone
ON/OFF with the 5/∞ buttons.

Switching the AUX Mode (AUX)

It is possible to use auxiliary (AUX) equipment with this product.
Activate the AUX mode when using external equipment with this product.
1. Press the FUNCTION button and select the AUX Setting mode (AUX) in
the Initial Setting Menu.
2. Switch the AUX ON/OFF with
the 5/∞ buttons.
All manuals and user guides at all-guides.com
64