Setting The Subwoofer Control; Flap Auto Open (Flap Auto) - Pioneer DEH-P90DAB Manual De Operación

Setting the Subwoofer Control (Sub woofer control)
When rear speaker leads are connected to full range speakers (when "Full Range output" is
selected), you can connect the RCA Subwoofer output to a Subwoofer. In this case, you
can select whether to use the Subwoofer controller's (Low Pass Filter, Phase) built-in
"Internal" or the auxiliary "External".
1. Press the FUNCTION button and select the Subwoofer Control mode
(Sub woofer control) in the Initial Setting Menu.
2. Change the Subwoofer
Controller with the 2/3 but-
tons.
Note:
• When the Rear Speaker Output is "Sub woofer output", you cannot change the Subwoofer
Controller.
• If you change the Subwoofer Controller, Subwoofer output and Non-Fading output in the Audio
Menu return to the factory settings.
• Even if you change this setting, there is no output unless you switch the Non-Fading Output (refer
to page 56) or Subwoofer Output (refer to page 55) in the Audio Menu ON.

Flap auto open (FLAP AUTO)

For theft protection, the front panel opens automatically and easily detaches.
Initially, this function is ON.
1. Press the FUNCTION button and select the Flap Auto Open mode (FLAP
AUTO) in the Initial Setting Menu.
2. Switch the Flap Auto Open
ON/OFF with the 5/∞ but-
tons.
All manuals and user guides at all-guides.com
66