Specifications; General Characteristics; Generator Accessories - Stel HI-MIG 353/503S-P 400V 3F Manual De Instrucciones

ENGLISH

2.0 - SPECIFICATIONS

2.1 - GENERAL CHARACTERISTICS

This new series of generators with electronic regulation controlled by a microproces-
sor ,allows you to achieve excellent welding quality, thanks to the advanced technol-
ogies applied. The microprocessor circuit controls and optimises the transfer of the
arc irrespective of the load variation and of the impedance of the welding cables.
The controls on the front panel allow easy programming of the welding sequences
depending on the operating requirements.
The inverter technology used has allowed the following to be obtained:
- generators with extremely low weight and compact dimensions;
- reduced energy consumption ;
- excellent dynamic response;
- very high power factor and yields;
- better welding characteristics;
- viewing of the data and of the set functions on the display.
The electronic components are enclosed in a sturdy structure that is easy to carry
and cooled with forced air by fans with low noise production.

2.2 - GENERATOR ACCESSORIES

GENERATORE HI-MIG 353 S-P
GENERATORE HI-MIG 503 S-P
MIG TROLLEY KIT
UR AWC K-P
GENERATOR SUPPORT KIT HI-MIG 300K-P
MIG AIR FILTER KIT
WIRE FEEDER TOP 504 S-P
10 WAY CONNECTOR KIT
STEL s.r.l. – Via del Progresso n° 59 – 36020
Loc. Castegnero (VICENZA) - ITALY
TEL. +39 444 639525 (central.) – +39 444 639682 (comm.)
FAX +39 444 639641 – E-mail: stel @ stelgroup.it
http: www.stelgroup.it
HI-MIG 353/503S-P 400V 3F
COD. 6907900030
DESCRIPTION
(cod. 608830000L)
(cod. 609210000L)
COD. 604970000L
COD. 609190000L
COD. 610915000L
COD. 605990000L
COD. 609220000L
COD. 608810000L
37