General Characteristics; Electrical Characteristics - Stel THOR 103 Manual De Instrucciones

ENGLISH
THOR 103
COD. 6909500060
2.0- SPECIFICATIONSCARATTERISTICHE
2.1- GENERAL CHARACTERISTICS AND WARNINGS
The generator supplies adjustable continuous current so as to have
maximum cutting performance
The generator has been designed with the most advanced technologies
to offer the following advantages:
- Low weight to allow maximum ease of handling.
- The inverter technology allows a stable arc to be obtained, which
ensures high cutting quality for a great variety of metals and thicknesses.
- The pilot arc can perforate painted or rusty metals.
- The continuous pilot arc allows easy cutting of perforated materials; the
pilot arc is transferred to the piece that is to be cut when the torch is
about 3 mm. away from the cutting surface.
- The regulating potentiometer, positioned on the front panel, sets the
cutting current of the machine.
- The generator needs compressed air .
The air used must be free from impurities, oil or other polluting
substances.
2.2– ELECTRICAL CHARACTERISTICS
GENERATOR
Supply voltage
Phases
Frequency
Rated current ED 35%
Rated power ED 35%
Cutting current ED 100%
Cutting current ED 35%
No-load voltage
STEL s.r.l. – Via del Progresso n° 59 – 36020
Loc. Castegnero (VICENZA) - ITALY
TEL. +39 444 639525 (central.) – +39 444 639682 (comm.)
FAX +39 444 639641 – E-mail: stel @ stelgroup.it
http: www.stelgroup.it
TECHNICAL
DESCRIPTION
UNIT THOR 103
V 400
3
Hz
50/60
A
21
KVA
14.3
80
A
100
A
305
V
37
ENGLISH
THOR 103
COD. 6909500060
2.0- SPECIFICATIONSCARATTERISTICHE
2.1- GENERAL CHARACTERISTICS AND WARNINGS
The generator supplies adjustable continuous current so as to have
maximum cutting performance
The generator has been designed with the most advanced technologies
to offer the following advantages:
- Low weight to allow maximum ease of handling.
- The inverter technology allows a stable arc to be obtained, which
ensures high cutting quality for a great variety of metals and thicknesses.
- The pilot arc can perforate painted or rusty metals.
- The continuous pilot arc allows easy cutting of perforated materials; the
pilot arc is transferred to the piece that is to be cut when the torch is
about 3 mm. away from the cutting surface.
- The regulating potentiometer, positioned on the front panel, sets the
cutting current of the machine.
- The generator needs compressed air .
The air used must be free from impurities, oil or other polluting
substances.
2.2– ELECTRICAL CHARACTERISTICS
GENERATOR
Supply voltage
Phases
Frequency
Rated current ED 35%
Rated power ED 35%
Cutting current ED 100%
Cutting current ED 35%
No-load voltage
STEL s.r.l. – Via del Progresso n° 59 – 36020
Loc. Castegnero (VICENZA) - ITALY
TEL. +39 444 639525 (central.) – +39 444 639682 (comm.)
FAX +39 444 639641 – E-mail: stel @ stelgroup.it
http: www.stelgroup.it
TECHNICAL
DESCRIPTION
UNIT THOR 103
V 400
3
Hz
50/60
A
21
KVA
14.3
80
A
100
A
305
V
37