Bimar VP441 Folleto De Instrucciones página 15

All manuals and user guides at all-guides.com
 Keep the appliance away from:
heat sources (e.g. open flame, gas stove, etc.)
-
liquid receptacles (e.g. sinks, etc.) to avoid water splashing onto
-
the appliance or it falling in (minimum distance of 2 meters)
fabrics (curtains, etc.) or floating materials that could obstruct
-
the air intake grille; make sure that the front is free of floating
materials (dust, etc.).
 The appliance must not be used in dusty environments or in the
presence of floating materials or used in a room where there is a fire
risk.
 Stand the appliance on a smooth, horizontal surface or table; do not
place it on a inclined surface (the appliance could fall over).
ASSEMBLY
Before assembling the fan, make sure it is unplugged from the socket.
Use the figures for reference.
1. The support consists of:
- 4 folding feet (7) hinged to the central hub
- A fixed column (9) with adjustable rod (10), and connecting joint
at the opposite end
- Cover (5)
Open the 4 feet to 90 ° like an X, as shown in figure "A" and click each
one to the central hub by pushing it towards the centre of the base.
Slide the cover onto the column: the cylindrical part should be at the top
(adjustable rod), figure "B".
Connect the column to the X-shaped base: insert the
joint into the hub, as shown in the figure to the side, by
aligning the shaft key with one of the 4 slots in the hub,
click it right in and lock the column to the feet by
tightening the hub nut, as shown in figure "C".
Once you have finished, make sure that the column and feet are securely
coupled.
15