Bimar VP441 Folleto De Instrucciones página 16

All manuals and user guides at all-guides.com
Fig.A
2. Lengthen the adjustable rod (10) to the required height and lock
tightly using the rod fixing ring nut (4).
3. Unscrew the ring nuts: fan fixing and rear grid on the motor shaft.
4. Insert the rear grille (16) in the motor housing, so that the handle
(11) appears at the top, and position it so that the pins fit in their
corresponding holes and lock it with the ring nut provided (15).
5. Insert the fan (17) on the motor shaft (1) and lock with the
appropriate ring nut (13) turning it tightly anti-clockwise.
6. Couple the front grille (12) to the rear one (16) locking it with the
closing hooks. For safety reasons, you must make sure that it is
attached by using the screws and nuts provided, which are to be
used in the holes in the edge of the grilles (the holes for the screw
must be in the top part).
7. Attach the fan body to the stand by inserting the lower hole on the
adjustable pole of the stand and lock it by tightening the stand
attachment screw (18).
A1
A2
Fig.B
16
A3
Fig.C