Intended Use; Safety Advice - BGS technic 8857 Manual De Instrucciones

Engine Timing Tool Set for Opel 1.2 / 1.4
TOOLS
No.
1
Camshaft Sensor Disc Tool
2
Camshaft Adjuster Tool
3 Camshaft Sensor Locking Tool
4
Chain Tensioner Locking Tool
5 Camshaft Locking Tool
6 Crankshaft Locking Tool
7
Belt Tensioner Locking Pin

INTENDED USE

This tool set is made adjusting the engine timing on 1.2 and 1.4 L Opel engines with two overhead
camshafts (see vehicle list). The set includes important tools for locking camshaft and crankshaft and
allows a replacement of timing chain and there components.

SAFETY ADVICE

•
DO NOT use the set if any parts are missing or damaged.
•
Never lay tools on the vehicle's battery. This may short the terminals together.
•
Be careful when working on running engines. Loose clothes, tools and other things can be
caught up in revolving parts which may lead to serious injuries.
•
Keep children and other unauthorised persons away from the working area.
•
Be careful when working on hot engines – risk of burn!
•
Remove the negative battery connection before repairing, so you avoid short circuits and that the
engine will not start unintentionally.
•
This manual is just brief information and will not replace a garage handbook.
•
Always consult specific service literature for information about torques, assemblies and
disassemblies etc.
•
After any successful maintenance and before starting the engine, you should rotate the engine
for two turns manually to check the new control time.
•
Turn the crankshaft in the normal direction (clockwise unless stated otherwise) and only at the
crankshaft itself, never turn the crankshaft by turning camshaft or another wheel.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Description
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 8857
to be used as OEM
EN-49977-100
EN-49977-200
EN-49978
KM-955-1
KM-953-A
KM-952
KM-955-2
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed