Stiga ST 1200 Guia De Instalacion página 23

All manuals and user guides at all-guides.com
6. The best trimming results are obtained by
swinging the machine in an arc from right to
left.
7. If the grass is tall, it is better to trim it in several
stages.
8. The operational life of the trimming line will be
considerably shortened by trimming close up
against house foundations, brick walls, etc.
Avoid this by using the extendible fender (J) to
set the right distance (fig. 6).
9. Do not force the motor unnecessarily when the
battery power begins to fall off as this will
shorten the battery life.
FEEDING TRIMMING LINE
Every time the machine is started/stopped, a small
part of trimming line is fed out automatically. The
blade in the safety cover, cuts this line off to the
right length.
REPLACING TRIMMER LINE
1. Press in both the snap locks on the spool cover
(K) (fig. 7).
2. Remove the spool cover (fig. 8).
3. Take the empty spool (L) out of the spool holder
(fig. 9). Roll a new trimming line clockwise
onto the spool (fig. 10). Only use genuine trim-
ming line with a diameter of 1.4 mm.
4. Insert the end of the trimming line through the
hole in the spool holder (fig. 11).
5. Place the spool in the spool holder (fig. 12).
Then click the spool cover into place.
Take care not to injure yourself on the
blade in the safety guard.
MAINTENANCE
1. Keep the spool, spool holder, safety guard and
trimming blade free from grass and other mate-
rials which can stick on.
2. Each time after use, the space between the spool
holder and the safety guard should be inspected.
Remove any grass which may have become
wrapped around the motor shaft.
3. The motor's air intake (M) must be checked and
cleaned at regular intervals (fig. 6). The ma-
chine must not be rinsed with water.
ENGLISH
SERVICE
To safeguard reliable operation of the machine,
any repairs and guarantee service should be carried
out by an authorized service station.
Always use genuine spare parts and accessories.
Non-genuine spare parts or accessories have
not been inspected or approved by the ma-
chine's manufacturer.
The use of non-genuine spare parts or accesso-
ries can affect the function and safety of the ma-
chine, even if they seem to fit the machine. The
manufacturer of the machine accepts no re-
sponsibility for damage caused by such parts or
accessories.
ENVIRONMENT
In order to protect the environment, we recom-
mend that the following points are especially com-
plied with:
• Do not dispose of used batteries in the refuse
bin. Return them to a battery collection point
for recycling.
• When, after many years of service, your ma-
chine needs to be replaced or is no longer re-
quired, we recommend that the machine is
returned to your distributor for recycling.
The manufacturer reserves the right to change the
product without prior notice being given.
GB
23