Names of Parts
1
Saw chain
2
Guide bar
3
Fuel tank cap
4
Front handle
5
Primer (starter pull rope)
6
Air cleaner cover
7
Starter pull rope
8
Choke lever
9
STOP switch
10 Safety trigger
11 Guide bar cover
12 Oil tank cap
13 Starter cover
14 Saw chain adjustment screw
15 Latch
16 Front hand guard / chain brake lever
17 Spike bar
18 Bar retaining nuts
19 Chain catcher
20 Muffler
21 Muffler shield
22 Sparking plug
23 Throttle trigger
24 Rear handle
3
Assembly
The package is produced of recyclable material.
Please, let properly liquidate the package mate-
rial.
3.1
Guide Bar Assembly
1.
Release chain brake. Pull the chain brake lever (1/1)
to the front handle.
2.
Loosen bar retaining nuts (1/2) and screws (1/3) on
the muffler shield and then remove the cover.
GB 3