Technical Specifications; Assembly Instruction - Hudora 76896 Instrucciones De Montaje Y De Uso

INSTrUcTIoNS oN ASSEmBLY AND USE
EN
coNGrATULATIoNS oN PUrcHASING YoUr ProDUcT!
Please read these instructions carefully. The instructions are an integral component of
the product. Therefore, please store them and the packaging carefully in case questions
arise in the future. Please always include these instructions when giving the product to
a third party. This product must be assembled by an adult. This product is not designed
for industrial use. The use of the product requires certain capabilities and skills. Always
adjust according to the age of the user and use for the purpose it has been designed for.

TEcHNIcAL SPEcIFIcATIoNS

Item: Kick It football goal
Item: 76896
Dimensions when assembled: 213 x 152 x 76 cm
If you have assembly problems or would like further information on the product, we have
all you need and more at http://www.hudora.de/artnr/76896/.
coNTENTS
18 Goalposts
1 Goal net
5 Tent pegs (for stand fixing)
2 Tent pegs (for fixing the target shot)
1 Screw set
4 Draft canvas
1 Target shot
1 Manual
Other items included are meant to facilitate safe transportation and are not required for the
installation and use of the product.
SAFETY INSTrUcTIoNS
• Prior to use, check all parts of the goal for damages and correct assembly. In this regard,
it is important to check the connecting elements and screw connection for stability and
fit. Any sharp edges that might have formed must immediately be removed!
• Warning: do not climb on the goal frame or net or hang from the goal posts. There is a
serious risk of injury!
• Children should only use the product when they are under adult supervision.
• No liability is assumed for damages resulting from incorrect application of the instruc-
tion manual.

ASSEmBLY INSTrUcTIoN

Notice: Lubricate the connection assemblies on the narrow ends a bit before starting the
assembly. That facilitates the assembly and extends the durability of the product!
1. Assembly of the goal frame
Assemble the goal frame as indicated in fig. 1. Observe that you use the respectively
numbered tubes.
2. Assembly of the goal net
Spread the net straight at the back of the frame. Fasten the net on the frame by threading
the pull-through cord as indicated in illustration 2 around the bars and knotting the loose
ends with the frame.
3. Assembly of the target shot
Spread the goal wall and fasten it on the crossbar and the sides of the goal frame by means
of the Velcro(R) fasteners; secure then with pegs the bottom line on the ground.
4. Stand locking of the goal
Finally fix the goal frame by means of the pegs on the ground. Ascertain that the ground
is suitable for the application of pegs (e.g. no water pipes for sprinkler devices!). Make
sure that the pegs are completely driven into the ground and have firm position. Avoid
protruding fastenings (risk of stumbling). On too hard grounds the goal must be saved by
appropriate measures in another way against overturning in order to prevent risk of injuries
(e.g. with slabs or sandbags). Never play with an unsecured goal or never leave the goal
unsecured respectively.
All images are examples of the design.
All manuals and user guides at all-guides.com
HUDORA | Jägerwald 13 | 42897 Remscheid | Germany
www.hudora.de
USAGE INSTrUcTIoNS
• Only set up the goal on level ground.
• Please keep a minimum distance of at least 3 m to any surrounding obstacles.
• Secure the goal to keep it from toppling over – even if not in use.
• Avoid exposing the product unnecessarily to bad weather conditions. Keep it in a cool
and dry storage area.
• Check for any rust on the product and remove it immediately. Pushing together the
metal parts could lead to the protective layer being scratched and rust developing.
mAINTENANcE AND STorAGE
Use a dry or damp cloth only to clean the product; do not use special cleaning agents! Check
the product for damage or traces of wear and tear before and after each use. Do not make
any structural changes. For your own safety, please use original spare parts only. These can
be sourced from HUDORA. If parts become damaged or if sharp edges or corners should
develop, the product may not be used any more. If in any doubt, please contact our service
team (http://www.hudora.de/service/). Store the product in a safe place where it is protected
from the elements, cannot be damaged, and cannot injure anyone.
DISPoSAL ADVIcE
At the end of the product's life, please dispose of it at an appropriate collection point provi-
ded in your area. Local waste management companies will be able to answer your questions
on this.
SErVIcE
We make every effort to deliver faultless products. If faults do arise however, we put just as
much effort into rectifying them. Therefore, you can find numerous information on the pro-
duct, replacement parts, solutions to problems and lost assembly manuals at http://www.
hudora.de/artnr/76896/.
Item no. 76896
As of 03/12
Page 4/8