Handset; Connecting The Charging Cradle; Setting Up The Handset For Use; Inserting The Batteries - Gigaset E630 Manual De Instrucciones

Gigaset E630/E630A / SUG US en / A31008-M2503-R301-1-3S43 / starting.fm / 8/29/19

Handset

Handset

Connecting the charging cradle

¤
Connect the flat plug of the power
adapter
¤
Plug the mains unit into your power
socket
To remove the plug from the charging cradle
again:
¤
Disconnect the power adapter from the
mains power supply.
¤
Press the release button
¤
Pull out the plug

Setting up the handset for use

The display is protected by a plastic film.

Inserting the batteries

Only use rechargeable batteries, as this could otherwise result in significant health
risks and personal injury. For example, the outer casing of the batteries could be
destroyed or the batteries could explode. The device could also malfunction or be
damaged as a result of using batteries that are not of the recommended type.
¤
Insert the batteries (for correct +/- direction,
see diagram
¤
Hold the battery cover at a slight angle and insert
the bottom into the casing first
¤
Press the cover
¤
Insert the locking disc as shown (at an angle of
approx. 20°)
markings.
8
.
1
.
2
.
3
.
4
).
1
until it clicks into place.
3
. Pay attention to the arrow
4
2
Please remove the protective film!
1
.
2
4
1
3
4
2
3
en fr es