Klarstein 10030683 Manual Del Usuario página 49

All manuals and user guides at all-guides.com
Adjust the timer setting as follows:
Model with touch control (figure right):
Use the "+" and "-" buttons to set the timer. Touch and
hold either button to increase or decrease the value
more quickly.
Note: When the timer indicator is flashing, touch
the timer button again to quickly confirm the timer
setting.
Model with touch slider (figure below):
In the timer indicator, the digits of the two-digit minute
3 display can be set individually. First set the units of the
minutes by sliding the slider. Touch the timer button
again. The tens digit is displayed and blinks in the
timer indicator. Now set the tens digit of the minutes by
sliding the slider.
Note: By continuous touching the timer button, the
minutes can be set with the slider in the following
order: "Single Digit - Ten Digit - Confirm Setting -
Single Digit - ...".
When the timer is set, it will begin to count down
immediately, the display will show the remaining time
Note: The red dot next to power level indicator
will illuminate for those zones be set with timer. You
4
can check timer setting of different cooking zone
which set with timer, by touching the corresponding
cooking zone button.
Note: If more than one heating zone has timer
setting, the timer indicator will show the lowest time.
The red dot next to power level indicator will flash.
EN
49