Descargar Imprimir esta página

KPS CC820 Manual De Instrucciones página 2

Comprobador de enchufes y localizador de protecciones

Publicidad

Idiomas disponibles

Idiomas disponibles

MANUAL DE INSTRUCCIONES
INSTRUCTIONS MANUAL
CIRCUIT BREAKER FINDER
SOCKET TESTER INSTRUCTION
KPS-CC820
- SKU: KPSCC820CBINT
ENGLISH
The task of Circuit Breaker F inder/Socket Tester (KPSCC820) is finds correct breaker or fuse and test socket.
You will have annoyance no more far locating the corree!
circuit breaker supplying power to an AC outlet or lighting fixture.
WARNING: Please caution extremely when use the KPSCC820 in the gigantic circuit breaker ark. Don't use when
voltage more !han 120V/230V AC. You can turn on the flashlight in the dark surroundings.
Features
• Automatically and quickly finds correct breaker or fuse.
• Quickly and easy identifies conditions of circuit socket.
• MS5902-Tx Works on 220V AC, MS5902-TB Works on 11 0V AC
• Operating temperature: O - 50ºC
Operation: Locating a Circuit Breaker or Fuse
• Keep the pillar at left on the KPS-CC820
• Plug the KPS-CC820 into the receptacle. if there is a candescent light fixture, please install a socket adapter befare
make sure the switch is OFF. then plug the KPSCC820 into the socket adapter,turn the switch on at one time.
(Socket adapter need purchase additional)
• Go to the circuit breaker panel box.
• Turn the KPS-CC820 on,the red LED is light.
• Place the chapiter of the KPS-CC820 directly onto the circuit breaker or fuse.
• Slide the chapiter of the KPS-CC820 down each breaker along both si des of the panel . Then the KPS-CC820 will
beep frequently as it denote the relative signal strength.
• Move the KPS-CC820 down each breaker once more. On the third pass, the KPS-CC820 will beep ,the red LED
will quench and the green LED will light only at the circuit Breaker powering the KPS-CC820.
• Push the breaker off and check that the LED on the KPSCC820 in the outlet is off to confirm you have found the
corree! breaker or buse.
Test Socket
• Keep the pillar at right on the KPS-CC820.
• Please contradistinguish nameplate on the KPS-CC820.
Maintenance
• Keep clean with a dry cloth.
• When the yellow LED is light on the KPS-CC820, please unscrew and
remove cover, insert new 9V battery so as to the KPS-CC820 is well-balanced.
APAC: MGL GLOBAL SOLUTIONS LTD
Taipei, Taiwan.
info.apac@mgl-intl.com
EMEA: MGL EUMAN S.L.
Asturias, Spain.
info.emea@mgl-intl.com
Comprobador de enchufes y localizador de protecciones
AMERICAS: MGL AMERICA, LLC.
US East Coast: Charlotte, North Carolina.
KPS SOLUCIONES EN ENERGÍA, S.L.
US West Coast: Brea, California.
info.na@mgl-intl.com
Parque Empresarial de Argame,
C/Picu Castiellu, Parcelas i-1 a i-3
www.mgl-intl.com
E-33163 Argame, Morcín
Asturias, España, (Spain)
11mA 230V 50Hz
ENG
Ver el manual
de instrucciones
completo
See the full
instruction manual

Publicidad

loading

Este manual también es adecuado para:

Kpscc820cbint