Descargar Imprimir esta página

Busch+Müller IXON Rock 198 Instrucciones De Uso página 13

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 31
Height adjustments of the light
Adjust the bicycle light so that oncoming traffic is not blinded or startled. On a completely even road, the
horizontal light cut-off line must always be visible in the distance!
Fig.: Example of bicycle light adjustment
24
Attention: Ensure blinded-free
alignment of the spotlight!
7 Charging the battery
The IXON Rock has an integral lithium-ion battery that must be charged before first use.
To charge, open the rear cover on the headlight. Connect the enclosed USB cable to the Micro-
USB socket on the headlight. Connect the USB cable to the enclosed power supply unit, to
another standard USB power supply unit (max. 1,000 mA, 5 V) or to a computer.
During the charging process, the LED on the switch shines blue. When the LED light is off, the
charging process is complete. When charging with an alternative device or computer, the LED on
the switch flashes blue.
Overcharging is basically impossible as the power supply is automatically switched off. Ensure to
charge the battery at temperatures above 0°C only.
Warning: As a precaution, never leave the battery unattended during the charging process and
place it on a fireproof surface.
Please note: During the charging process, the headlight is not protected against splash and rain
water. The headlight can also be charged when switched on. We do not assume any liability for
damage likely to be caused by moisture entering the headlight during the charging process.
25

Publicidad

loading