Emmaljunga NXT90 SELECT Manual De Instrucciones Y Servicio página 53

move the wooden seat board from the seat unit
fabrics. Hand wash seat fabrics in lukewarm wa-
ter. Use mild liquid soap as detergent. Cleanse
thoroughly. Drip dry the seat fabric. Only wipe
the nylon straps and plastic parts clean with a
damp cloth. Do not hand wash. Make sure the
harness is dry before reassembly.
Mattress
We recommend hand washing, drip dry.
Carrycot:
Remove hood and mattress. Wipe the exterior
fabric and the interior nonwoven material, clean
with a damp cloth. Do not hand wash. Dry the
pram body in its fully extended position.
General Information
• Ironing: If any fabric part needs to be
ironed, always use a 100 % cotton cloth in-
between the iron and the fabric to protect
the fabric surface. Iron the exterior fabrics
(100 %) polyester and the interior fabrics on
gentle heat (110°C on the iron).
• Make sure all parts are completely dry
before reassembly. Check all seams, edges
and zips.
• You may apply a material protector on the
exterior fabric after washing. Always apply
before reassembly.
WARNING
• Do not place your child/children in the stroller
for at least 24 hours after applying a material
protector.
Reassemble after washing
WARNING
• Make sure all parts are assembled correctly
according to the instructions in this manual.
NXT SELECT V1.0
EN
53