Dimensions; Instalation; Working Area - ESAB Origo Feed 304N P4 Manual Del Usuario

5

DIMENSIONS

230 mm
6 INSTALLATION
6.1) Recebimento
™
At receiving an Origo Feed 304N P4 remove all the packaging material around the unit and check for
possible damages that could have happened during transport. Any complaints related to transport damage
should be directed to the transport company.
Remove carefully any material that could obstruct the refrigeration air system.
Note: In case an Origo Feed 304 P4 is not installed immediately, keep it in its
original packaging or store it in a dry and well ventilated place.

6.2) Working area

Several facts should be taken into consideration when determining the working place of a welding machine,
in order to have a safe and efficient operation. An adequate ventilation is needed for the refrigeration of the
equipment and for the operator's safety.
The installation of any filter dispositive in the environment restricts the air volume availabe for the machine
refrigeration which can cause overheating to the internal equipment. All guarantee undertakings from the
supplier cease to apply if the customer/user installs any filter dispositive not authorized by the supplier.
N.B. DO NOT USE THE MAIN SOURCE NEUTRAL FOR EARTH :
CONNECTION.
All the eletric connections should be fitted completely to avoid risk of
sparklings, over heating or voltage slopes in the circuits.
All manuals and user guides at all-guides.com
™
- 24 -
570 mm
380 mm