FITFIU FITNESS RA-300 Manual Usuario página 39

RA-300
PASO 3
Insert seat (38) onto the sliding rail (30).
Remove bolts (9), spring washers (10) and washers
(11) from sliding rail (30), Attach rear stabilizer (37) to
sliding rail (30) using bolts (9), spring washers (10)
and washers (11) . Tighten and secure with allen
wrench (A).
Fix Bolt(35) and limiter (34) to sliding rail (30) with
allen wrench (A).
Put end cap (36) into sliding rail (30).
PASO 4
Attach sliding rail (30) into the main frame (6) using bolts (32), nylon nut (33). Tighten and secure with spanner (B) .
Hold the main frame (6) by hand, tighten and secure the sliding rail (30) to main frame (6) with knob (26) and washer (27).
EN
39