FITFIU FITNESS RA-300 Manual Usuario página 43

ADJUSTMENTS
PEDAL
The pedal strap is adjustable and can be customised to fit the size of the user's foot.
To tighten, pull the velcro towards the side of the strap.
RESISTANCE
Rotate the tension knob (78) clockwise to increase the
level of resistance. Rotate the tension knob (78) counter-
clockwise to decrease the level of resistance.
Tension levels are set at Level 1 being the lowest and Level
12 being the highest.
When this product is on an uneven surface, please adjust
both foot pads (15) according to the above instruction
picture.
MAINTENANCE
• Make sure you have turned off the appliance and disconnected the plug before servicing.
• Do not clean with abrasives or solvents to avoid damage to finishes.
•
Be careful not to allow excessive moisture to enter the display panel as it may damage the display and create an
electrical hazard.
• Keep the equipment, especially the display console, out of direct sunlight to avoid damage.
• To clean around the plug and control panel use a soft, dry cloth, never use wet cloths.
• Do not insert the cleaner into the appliance to avoid hazards.
•
Do not use the air oar in wet or dusty environments as this can lead to leakage or mechanical failure. Use this
product on a flat surface.
ADJUSTING THE COMPUTER ANGLE
The rotation angle of the computer(1) can be adjusted to get the best view of
the computer's LCD screen.
43
RA-300
EN