Safety Information And Warnings - Rapid SF 104 Instrucciones Para El Uso

Warning sign, Identification number 258 416
Before starting to operate the machine, please
read and note the contents of the Operating In-
structions and the Safety Information.
Lire d'entretien et les conseils
F
de sécurité avant la mise en
marche et en tenir compte
pendant le fonctionnement
Carefully read Operator's Vor Inbetriebnahme
GB
die Betriebsanleitung
Manual before handling the
machine. Observe instruc- und Sicherheitshin-
tions and safetyrules when weise lesen und be-
achten
operating
Manufacturer’s Nameplate
1. Introduction
Purpose of the operating instructions
The operating instructions contain important infor-
mation that will enable you to operate your snow-
thrower safely, correctly and economically. By
paying attention to the instructions, you will help
to prevent accidents, reduce repair costs and out-
age times, and increase the service lifetime and
reliability of your snowthrower. The operating in-
structions are included in the scope of delivery for
the machine.

1.1 Safety information and warnings

Please note the following terms that are used in
safety information and warnings in these operating
instructions:
Danger
Immediate danger which results in severe injury to
people, or death.
Warning
Danger or unsafe action which results in severe
injury to people, or death.
Caution
Means that minor injuries to people or damage to
property may occur.
Attention
Means that material damage may occur.
43
Leggere attentamente il
I
manuale dell'operatore
prima di far funzionare la
macchina. Osservare le
norme e le istru-zione di
sicurezza durante il funzi-
D
onamento
Antes de poner la maquina
E
en funcionamiento, leer
detenida-mente el manual
del operador y las normas
de seguridad
Note
Indicates information that will enable you to use
the machine in an efficient and technically correct
way.
1.2 Use in accordance with the specified purpose
• This appliance is authorized only for correct
use as a snowthrower in accordance with the
descriptions and safety instructions given in
this user's guide.
• Any use which goes beyond the foregoing is
deemed to be ‘use other than in accordance
with the specified purpose’. The manufacturer
shall not be liable for any loss or damage en-
suing therefrom. The risk in respect of such
damage and loss shall be borne solely by the
user.
• Use in accordance with the specified purpose
shall also include compliance with the opera-
tion, servicing and maintenance conditions sti-
pulated by the manufacturer.
• The machine must only be used, serviced and
repaired by persons who are familiar with such
work and who have been instructed about the
dangers.
• The owner guarantees that the machine will be
used in accordance with the specified purpose
and that they shall be in safe operating con-
dition.
• The owner shall inform Rapid as soon as any
safety defects become apparent on the machi-
ne or the ancillary equipment.
• Complex work on the machine must be under-
taken exclusively by an authorised Rapid ser-
vice centre.
• If any changes to the structural design are ma-
de, or if any ancillary equipment which Rapid
has not released is built onto it, this shall cau-
se the immediate loss of the guarantee claim.
• The relevant accident prevention regulations
and the generally recognised safety rules must
be followed.
• Only use original Rapid spare parts.